The Anycubic Photon Mono was once one of the most capable and widely adopted monochrome‑LCD printers in the consumer and professional resin‑printing market, and selecting the right anycubic photon mono resin is essential for achieving the speed, accuracy, and reliability this machine is known for. This page provides the full validated Anycubic Photon Mono resin settings for all supported Liqcreate materials. Equipped with a 405 nm monochrome LCD, a 130 × 80 × 165 mm build volume, and a high‑resolution 51 µm pixel size, the Photon Mono delivers significantly faster curing and sharper detail reproduction than earlier RGB‑LCD printers. Its stronger light output allows it to process a broad range of third‑party materials, including all validated Liqcreate resins, with shorter exposure times and consistent layer formation.
Because the Photon Mono’s monochrome LCD transmits far more UV energy than traditional RGB screens, it behaves differently when selecting and tuning anycubic photon mono resin. Materials that were slow or difficult to cure on older systems now print efficiently. Engineering‑grade resins also benefit from the printer’s 405 nm wavelength and uniform light distribution. Liqcreate provides optimized exposure settings specifically tested on the Photon Mono platform, ensuring predictable curing behavior, excellent dimensional accuracy, and reliable performance across functional prototypes, dental models, miniatures, and high‑detail components. If you need assistance with resin selection or exposure tuning, our technical team can help, contact our Liqcreate engineering team.
Choosing the right anycubic photon mono resin directly influences print speed, surface finish, mechanical strength, and workflow efficiency. With its fast‑curing monochrome LCD, generous build size, and precise pixel resolution, the Photon Mono is an ideal match for Liqcreate’s engineering, dental, and specialty materials. For users comparing different machines, you can find a complete overview of all Anycubic resin 3D‑printers.
To support your workflow further, users working with Chitubox can download the validated Photon Mono resin parameters. Those exploring material compatibility can consult the full Liqcreate resin compatibility and settings master database, which includes validated settings for all supported resins and printers.
Anycubic Photon Mono resin 3D-printing parameters
The validated Anycubic Photon Mono resin parameters below provide reliable exposure times, lift settings, and workflow guidance for consistent, high‑quality MSLA printing with all supported Liqcreate materials.
| Resin | Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height (mm) | Lift speed / retract speed (mm/min) | Off-time / bottom (seconds) |
| Deep Blue | 100 µm | 5,5 | 2 | 70 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 4,0 | 2 | 50 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Stone Coal Black | 100 µm | 5,5 | 2 | 70 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 4,0 | 2 | 50 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Premium White | 100 µm | 2,5 | 2 | 60 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 1,8 | 2 | 50 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Premium Black | 100 µm | 4,5 | 2 | 60 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 3,5 | 3 | 50 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Premium Model | 100 µm | 2,0 | 2 | 60 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 1,7 | 2 | 50 | 6 | 90 / 240 | 1,0 / 3,0 | |
| (dental)* | 50 µm | 1,4 | 2 | 50 | 6 | 60 / 90 | 2,0 / 3,0 |
| Premium Tough | 100 µm | 6,7 | 1 | 50 | 6 | 90 / 240 | 1,0 / 3,0 |
| Wax Castable | 100 µm | 3,5 | 2 | 70 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 3,0 | 2 | 50 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Premium Flex* | 100 µm | 4,7 | 2 | 40 | 10 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 3,5 | 1 | 40 | 10 | 90 / 240 | 1,0 / 3,0 | |
| Clear Impact | 100 µm | 8,0 | 2 | 70 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 7,0 | 2 | 60 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Strong-X | 100 µm | 6,5 | 2 | 70 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 5,0 | 3 | 70 | 6 | 90 / 240 | 1,0 / 3,0 | |
| ESD | 100 µm | 7,0 | 2 | 60 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 5,5 | 3 | 50 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Tough-X* | 100 µm | 14,0 | 2 | 80 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 12,0 | 2 | 60 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Flexible-X* | 100 µm | 15,0 | 2 | 80 | 10 | 90 / 240 | 1,0 / 3,0 |
| Elastomer-X* | 100 µm regular | 16,0 | 2 | 60 | 10 | 90 / 240 | 1,0 / 3,0 |
| 50 µm regular | 14,0 | 2 | 60 | 10 | 90 / 240 | 1,0 / 3,0 | |
| 100 µm thin | 19,0 | 2 | 60 | 10 | 90 / 240 | 1,0 / 3,0 | |
| 50 µm thin | 16,0 | 2 | 60 | 10 | 90 / 240 | 1,0 / 3,0 | |
| Hazard Glow | 100 µm | 7,0 | 2 | 70 | 6 | 90 / 240 | 1,0 / 3,0 |
| Composite-X | 100 µm | 7,5 | 2 | 75 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 7,0 | 2 | 70 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Flame Retardant | 100 µm | 4,2 | 3 | 50 | 6 | 90 / 240 | 1,0 / 3,0 |
| HDT | 50 µm | 3,5 | 3 | 50 | 6 | 90 / 240 | 1,0 / 3,0 |
| Bio-Med Clear | 100 µm | 5,5 | 2 | 35 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 4,5 | 2 | 25 | 6 | 90 / 240 | 1,0 / 3,0 | |
| Bio-Med Flex | 100 µm | 6,0 | 2 | 50 | 10 | 60 / 90 | 1,0 / 3,0 |
| 50 µm | 5,0 | 2 | 40 | 10 | 60 / 90 | 1,0 / 3,0 | |
| Dental Model Pro Beige | 50 µm | 4,0 | 2 | 40 | 6 | 90 / 240 | 1,0 / 3,0 |
| Dental Model Pro Grey | 50 µm | 4,0 | 2 | 50 | 6 | 90 / 240 | 1,0 / 3,0 |
| Gingiva Mask | 100 µm | 14,0 | 2 | 30 | 6 | 90 / 240 | 1,0 / 3,0 |
| Rigid Pro | 100 µm | 5,0 | 2 | 50 | 6 | 90 / 240 | 1,0 / 3,0 |
| 50 µm | 3,5 | 2 | 40 | 6 | 90 / 240 | 1,0 / 3,0 |
* Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.
**Print dental models on supports for better quality models
Image by 3Dprintingindustry.com and Anycubic: the line-up of Anycubic Photon resin 3D-printers.
Anycubic Photon Mono, a 2K monochrome LCD resin 3D-printer
The Anycubic Photon Mono has a 6 inch monochrome LCD display. With this new technology, the Photon Mono prints at unbelievable printing speeds, so that it only takes a few seconds per layer The monochrome LCD is also thermally stable and has a much longer service life than conventional LCD displays. You can print with it for over 2000 hours with the Anycubic Photon Mono resin 3D-printer. In addition, thanks to the larger LCD display, the Anycubic Photon Mono also has a slightly larger installation space of 130 x 80 x 165 mm.
New matrix light source
The new matrix light source has been redesigned and consists of several UV LED lights that have a more even exposure to cure the resin. This not only improves accuracy for the Anycubic Photon Mono, but also enables shorter exposure times for the resin and better heat dissipation.
Support
If you have any questions related to Liqcreate 3D-printing resins on the Anycubic Photon Mono or other resin based 3D-printer. Send us an e-mail at info@liqcreate.com and our engineers will support to dial-in the requested Liqcreate resin.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
