Martrix520 features a build volume of up to 298 × 165 × 320 mm. It uses hot air heating to address resin performance issues in winter, and offers remote control and monitoring, air filtration, power calibration, door detection, and easy replacement of light sources and screens for efficient and safe operation. According to the manufacturer with its high Precision, it is easy to achieve 0.15mm detail, and accuracy is comparable to 3D printing DLP technology. With printing speed up to 50mm/h (resin depending), forming a volume of one surface at a time.
The Liqcreate team would like to thank UnionTech and Martrix for the cooperation to have a Martrix520 resin 3D-printer in the Liqcreate laboratory for resin parameter development.
Martrix 520 – by UnionTech – resin 3D-printing parameters.
Download the parameter file here.
| Resin | Layer thickness | Parameters available in file? | Remark |
| Deep Blue | 100 µm | Yes | |
| 50 µm | No | ||
| Premium White | 100 µm | Yes | |
| 50 µm | Yes | ||
| Premium Black | 100 µm | Yes | |
| 50 µm | Yes | ||
| Premium Model | 100 µm | Yes | |
| 50 µm | Yes | ||
| Wax Castable | 100 µm | Yes | |
| 50 µm | Yes | ||
| 30 µm | Yes | ||
| Clear Impact | 100 µm | Yes | |
| 50 µm | Yes | ||
| Strong-X | 100 µm | Yes | |
| 50 µm | Yes | ||
| ESD | 100 µm | Yes | |
| 50 µm | Yes | ||
| Tough-X | 100 µm | Yes | Use thick supports |
| 50 µm | Yes | ||
| Flexible-X | 100 µm | Yes | Use thick supports & |
| 50 µm | Yes | Maximum +- 70mm part height | |
| Flame Retardant | 100 µm | Yes | |
| HDT | 50 µm | Yes | |
| Bio-Med | 100 µm | Yes | |
| Clear | 50 µm | Yes | |
About the Martrix 520 resin MSLA / LCD 3D-printer by UnionTech
Image by All3DP: Martrix 520 resin 3D-printer by UnionTech
Martrix 520 resin 3D-printer specifications.
- – Build Volume: 298 x 165 x 320 mm.
- – Minimum layer Height: 10 microns.
- – XY Resolution: 50 microns
- – LCD pixels: 7K
- – Z-axis positioning accuracy: 0.01 mm.
- – Third-Party Materials: Yes, 405nm resin
- – Light output: 6,0 mW/cm2
Contact us if you have any questions or when you need help with settings for Liqcreate resin on the Martrix520 or other resin based 3D-printers.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
