Anycubic Photon D2 (DLP) compatible resin and parameters

Published by Liqcreate on 08/09/2022

Tags

Anycubic has built a strong reputation in the consumer resin 3D‑printing market with its affordable LCD and DLP systems, and the release of the Anycubic Photon D2 marks its second step into true DLP technology. Not even a year after entering the DLP segment with the Photon Ultra, the company introduced the Photon D2 as its successor, aiming to improve optical precision, build volume, and overall print consistency. These upgrades directly influence how users should approach Anycubic Photon D2 resin compatibility, especially when working with high‑performance materials that can respond differently to DLP projection compared to MSLA exposure.

The Photon D2 is marketed as a higher‑precision evolution of the Photon Ultra, featuring a 2K DLP projection system with a native resolution of 2560 × 1440 pixels and an XY pixel size of 51 micrometers. However, the exact nature of the projection hardware remains a point of discussion in the community. True 2K DLP projectors are not standard in any commercial sector, leading to speculation that Anycubic may be using the same 720p DLP chip found in the Photon Ultra, enhanced with an XRP actuator to achieve a higher effective resolution. This pixel‑shifting technology is widely used in consumer projectors to simulate higher resolutions, and its presence would explain how Anycubic achieves 2K output without relying on a native 2K DLP chip. Regardless of the underlying hardware, the resulting projection quality is significantly sharper than typical LCD printers, and this has a measurable impact on exposure behavior when tuning resins for the Photon D2.

Anycubic claims that the Photon D2 can compete with 8K LCD printers in terms of detail reproduction, despite the slicer reporting a maximum XY accuracy of 51 microns. For comparison, 8K MSLA machines such as the Sonic Mini 8K reach around 22 microns. The difference lies in the optical characteristics of DLP projection: the Photon D2 produces extremely clean voxel edges, minimal light bleed, and high uniformity across the build area. These factors allow the printer to deliver crisp details that often outperform LCD printers with theoretically higher pixel density. For Anycubic Photon D2 resin users, this means that exposure settings must be tuned with precision, as the curing window is narrower and the projection is more sensitive to over‑exposure than MSLA systems.

The build volume of 131 × 73 × 165 mm places the Photon D2 closer to mainstream resin printers than its predecessor, making it more suitable for dental models, miniatures, and functional prototypes printed with Liqcreate materials. The dual‑lens optical system improves uniformity and reduces distortion, ensuring that Liqcreate engineering resins, model resins, and elastomeric materials cure consistently across the platform. The 405 nm LED module powering the DLP engine has an expected lifespan exceeding 20,000 hours, providing long‑term stability for production environments where exposure consistency is essential.

Thermal behavior is another advantage of the Photon D2. With a typical power consumption of around 15 watts and a fanless optical engine, the printer maintains a stable internal temperature during long prints. This reduces viscosity fluctuations in resins, especially those with higher density or temperature‑sensitive flow characteristics. The mechanical design supports this stability: a precision Z‑axis rail minimizes vibration, and the textured build plate improves adhesion for both standard and engineering‑grade Liqcreate resins. Contact us if you have any questions on printing with Liqcreate resins on the Anycubic Photon D2 or other resin based 3D-printer or download the Chitubox settings for the Anycubic Photon D2 in the link.

Anycubic Photon D2 (DLP) resin 3D-printing parameters

Resin	Layer thickness	Exposure time (seconds)	Base layer count	Base layer exposure	Lift Height	Rest time per step	Lift speed / retract speed (mm/min)
Deep Blue	100 µm	11,0	2	70	6	1,0	90 / 150
	50 µm	9,0	2	60	6	1,0	90 / 150
Stone Coal Black	100 µm	13,0	2	70	6	1,0	90 / 150
	50 µm	10,0	2	60	6	1,0	90 / 150
Premium White	100 µm	5,0	2	30	6	1,0	90 / 150
	50 µm	4,0	2	25	6	1,0	90 / 150
Premium Black	100 µm	8,0	2	40	6	1,0	120 / 180
	50 µm	6,0	2	30	6	1,0	120 / 180
Premium Model	100 µm	4,5	2	15	6	2,0	120 / 180
	50 µm	3,5	2	10	6	2,0	120 / 180
Premium Tough	100 µm	8,5	2	30	6	2,0	90 / 120
	50 µm	6,2	2	25	6	2,0	90 / 120
Premium Flex*	100 µm	3,5	2	20	10	2,0	60 / 90
	50 µm	n/a
Wax Castable	100 µm	7,0	2	25	6	2,0	90 / 120
	50 µm	5,0	2	20	6	2,0	90 / 120
	25 µm	4,0	2	15	6	2,0	90 / 120
Clear Impact	100 µm	16,0	2	40	6	2,0	90 / 120
	50 µm	14,0	2	30	6	2,0	90 / 120
Strong-X	100 µm	16,0	2	50	6	2,0	90 / 120
	50 µm	14,0	2	40	6	2,0	90 / 120
ESD	100 µm	12,0	2	50	6	2,0	90 / 120
	50 µm	10,0	2	40	6	2,0	90 / 120
Tough-X*	100 µm	16,0	2	40	8	2,0	90 / 120
	50 µm	14,0	2	35	8	2,0	90 / 120
Flexible-X*	100 µm	14,0	2	40	10	2,0	90 / 120
	50 µm	12,0	2	35	10	2,0	90 / 120
Elastomer-X*	100 µm regular	20,0	2	50	10	2,0	90 / 120
	100 µm thin	23,0	2	50	10	2,0	90 / 120
	50 µm regular	18,0	2	40	10	2,0	90 / 120
	50 µm thin	21,0	2	40	10	2,0	90 / 120
Hazard Glow	100 µm	14,0	2	60	6	2,0	90 / 120
Composite-X	100 µm	8,0	2	50	6	2,0	90 / 120
	50 µm	6,5	2	40	6	2,0	90 / 120
Flame Retardant	100 µm	7,0	2	40	6	2,0	90 / 120
HDT	50 µm	6,0	2	30	6	2,0	90 / 120
Bio-Med Clear	100 µm	8,0	2	50	6	2,0	90 / 120
	50 µm	7,0	2	40	6	2,0	90 / 120
Bio-Med Flex	100 µm	8,5	2	50	10	2,0	60 / 90
	50 µm	7,5	2	40	10	2,0	60 / 90
Dental Model Pro Beige	100 µm	8,0	2	20	6	2,0	120 / 150
	50 µm	6,0	2	15	6	2,0	120 / 150
Dental Model Pro Grey	100 µm	8,0	2	20	6	2,0	120 / 150
	50 µm	6,0	2	20	6	2,0	120 / 150
Gingiva Mask	100 µm	12,0	2	20	10	2,0	60 / 120
	50 µm	10,0	2	15	10	2,0	60 / 120
Separation Model	100 µm	6,0	1	10	6	2,0	60 / 120
	50 µm	4,0	1	8	6	2,0	60 / 120
Rigid Pro	100 µm	7,0	2	40	6	2,0	90 / 150
	50 µm	6,0	2	30	6	2,0	90 / 150

* Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.

**Use heavy supports

Button

About Anycubic Photon D2 (DLP) resin 3D-printer

Anycubic Photon D2 Ultra resin 3D-printer liqcreate DLP resins photopolymer engineering castable flexible elastic flex strong tough abs-like liqcreate

Image by Anycubic: The new Anycubic Photon D2, successor of the fist affordable DLP resin 3D-printer

Anycubic Photon D2 vs Photon Ultra

	Photon D2	Photon Ultra
Print size	5.9″	4.6″
Screen resolution	2560 x 1440 pixels	1280 x 720 pixels
Pixel size	0,051 mm (51 µm)	0,080 mm (80 µm)
Screen resolution	498ppi	319ppi
Build Volume (XYZ)	130,56 x 73,44 x 165 mm	102,4 x 57,6 x 165 mm

Anycubic Photon D2 (DLP) resin 3D-printer specifications

The Anycubic Photon D2 is an open 405nm DLP 3D printer developed in collaboration with Texas Instruments to bring digital light processing (DLP) technology to the desktop 3D printer industry. With a build voume of 131 x 73 x 165 mm. A DLP printer has an optical projector that emits concentrated beams of light only where the resin needs to cure, delivering incredibly sharp results with almost no light leakage or blurred edges. The DLP projector can project a beam with higher uniformity, and the light uniformity on the surface is more than 90%. In an LCD printer, a single large UV light exposes through a screen that has open or closed pixels. However, the light source is always on, resulting in light leakage even with dark pixels.

- – Build Volume: 131 x 73 x 165 mm
- – Layer Height: 10 microns
- – XY Resolution: 2,560 x 1,440 pixels
- – XY Pixel size 50 microns
- – Z positioning accuracy: 0.1 mm
- – Printing Speed: < 50 mm/h
- – Bed Leveling: Manual
- – Display: 2.8-inch touchscreen
- – Third-Party Materials: Yes
- – Materials: 405 nm UV resin

Contact us if you have any questions or when you need help with settings for the Anycubic Photon D2 (DLP) or other resin based 3D-printers.

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Liqcreate