Experience the new standard for benchtop DLP bioprinters with Cellink Lumen X! Cellink is the manufacturer of DLP 3D-printers specially designed for bio-printing. Their amazing technology uses 405nm light, in extremely high power to usually work with bio-gels. Powered by their cutting-edge technology and harnessing 405 nm visible light, generation 3 of the LUMEN X™ brings a new degree of precision and utility to the light-based bioprinter space. One of our partners experimented with Liqcreate Bio-Med Clear on the Cellink Lumen X printer with success. Read the instructions below.
3D-printing parameters for Biocompatible resin on the Cellink Lumen X.
Before we start sharing what our partner has tested, we have to tell that this is all in experimental set-up. It could be that some variations in parameters are needed specifically for your part. If you want to learn more or need support from our technical team, please reach out to us at info@liqcreate.com.
Guidelines for Liqcreate Bio-Med Clear on the Cellink Lumen X bioprinter:
- Start with a clean PDMS coating.
- Set the Z-distance to 0,1mm.
- Use approx. 10mW/cm2 UV power.
- Exposure time in the range of 3.5 – 5.0 seconds.
About the Cellink Lumen X biomaterial resin 3D-printer.
Image by Cellink: The new Cellink Lumen X bioprinter.
Cellink Lumen X bio-ink resin 3D-printer specifications.
| Specifications | Cellink Lumen X photopolymer bioprinter |
| Pixel size | 0.035 mm |
| Build size | 68 * 38 * 100 mm |
| Wavelength | 405nm |
| UV power | Upto 30mW/cm2 |
| Operating temperature | Upto 60°C / 140°F |
Contact us if you have any questions or when you need help with settings for the Cellink Lumen X bioprinter and work with our biocompatible photopolymer 3D-printing resin.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
