The Creality Halot-Mage S is an ideal resin 3D printer for crafting detailed jewelry and miniatures. Printing impressive parts for both hobbyists and professionals. Key features include a 14K high-resolution monochrome LCD screen that ensures high precision and speed. Its 14K LCD screen consists of 13320 x 5120 pixels. With a build volume of 223 x 126 x 230 mm and 16.8 x 24.8 μm pixel size it is ideal for precise medium sized parts. A few resins are tested on the Creality Halot-Mage S – 14K. It is expected that most Liqcreate resins can work as they work on other Creality Halot-Mage S resin 3D-printers. If you want to try a non-validated Liqcreate resin, a good starting point are the Creality Halot-Sky resin settings, or send an e-mail to info@liqcreate.com for assistance. Download the Creality Halot-Mage S 14K Chitubox resin settings for Liqcreate materials in the link.
Creality Halot-Mage S 14K Compatible Resins & Parameters
Liqcreate materials cure reliably under the same 405 nm light spectrum used by Creality’s Halot series, making them widely compatible. In most Halot printers, the monochrome LCD and strong light engine provide consistent exposure that works well with Liqcreate’s calibrated settings. For resins that are not listed yet, users typically only adjust exposure times slightly to match each resin’s hardness or flexibility. As a result, Liqcreate resins let Halot printers produce detailed, durable prints across many applications with minimal tuning.
Creality Halot-Mage S 14K Resin Settings Table
| Layer thickness | Exposure time (seconds) | Base layer count | Base layer exposure | Lift Height (mm) | off time (s) | Motor speed (mm/s) | ||
| Deep Blue | 100 µm | 8,0 | 3 | 60 | 8 | 2 | 2 | |
| 50 µm | 5,5 | 3 | 50 | 8 | 2 | 2 | ||
| Stone Coal Black | 100 µm | 8,0 | 3 | 60 | 8 | 2 | 2 | |
| 50 µm | 5,5 | 3 | 50 | 8 | 2 | 2 | ||
| Bio-Med Clear | 100 µm | 8,0 | 3 | 60 | 8 | 2 | 2 | |
| 50 µm | 6,0 | 3 | 50 | 8 | 2 | 2 | ||
| Bio-Med Flex | 100 µm | 9,0 | 2 | 30 | 10 | 2 | 1 | |
| 50 µm | 8,0 | 2 | 25 | 10 | 2 | 1 | ||
| Premium White | 100 µm | 6,0 | 3 | 50 | 8 | 2 | 2 | |
| 50 µm | 4,5 | 3 | 40 | 8 | 2 | 2 | ||
| Premium Black | 100 µm | 5,5 | 2 | 50 | 8 | 2 | 2 | |
| 50 µm | 4,5 | 2 | 50 | 8 | 2 | 2 | ||
| Premium Model | 100 µm | 6,2 | 1 | 35 | 8 | 2 | 2 | |
| 50 µm | 5,3 | 1 | 30 | 8 | 2 | 2 | ||
| Premium Tough | 100 µm | 7,0 | 3 | 60 | 8 | 2 | 2 | |
| 50 µm | 4,0 | 3 | 50 | 8 | 2 | 2 | ||
| Wax Castable | 100 µm | 6,0 | 3 | 70 | 8 | 2 | 2 | |
| 50 µm | 4,0 | 3 | 60 | 8 | 2 | 2 | ||
| 25 µm | 3,0 | 2 | 60 | 8 | 2 | 2 | ||
| Premium Flex* | 100 µm | 6,0 | 2 | 60 | 12 | 3 | 1 | |
| 50 µm | 4,5 | 2 | 50 | 12 | 3 | 1 | ||
| Clear Impact | 100 µm | 10 | 3 | 60 | 8 | 2 | 2 | |
| 50 µm | 8,5 | 3 | 50 | 8 | 2 | 2 | ||
| ESD | 100 µm | 8,0 | 2 | 60 | 8 | 2 | 2 | |
| 50 µm | 6,0 | 2 | 50 | 8 | 2 | 2 | ||
| Flame Retardant HDT | 100 µm | 6,0 | 2 | 60 | 8 | 2 | 2 | |
| 50 µm | 4,0 | 2 | 50 | 8 | 2 | 2 | ||
| Rigid Pro | 100 µm | 5,0 | 2 | 50 | 8 | 2 | 2 | |
| 50 µm | 3,0 | 2 | 40 | 8 | 2 | 2 | ||
| Tough-X* | 100 µm | Not compatible | ||||||
| Flexible-X* | 100 µm | Not compatible | ||||||
| Elastomer-X* | 100 µm | Not compatible | ||||||
| Hazard Glow | 100 µm | 9,0 | 3 | 60 | 8 | 2 | 2 | |
| Composite-X | 100 µm | 8,0 | 2 | 60 | 8 | 2 | 2 | |
| 50 µm | 6,5 | 2 | 60 | 8 | 2 | 2 | ||
| Dental Model Pro Beige | 100 µm | 6,5 | 1 | 40 | 8 | 2 | 2 | |
| 50 µm | 5,5 | 1 | 40 | 8 | 2 | 2 | ||
| Dental Model Pro Grey | 100 µm | 6,0 | 1 | 40 | 8 | 2 | 2 | |
| 50 µm | 4,5 | 1 | 30 | 8 | 2 | 2 | ||
| Gingiva Mask | 100 µm | 10,0 | 1 | 50 | 10 | 2 | 1 | |
| 50 µm | 6,0 | 1 | 30 | 10 | 2 | 1 | ||
| Separation Model | 100 µm | 7,5 | 2 | 40 | 8 | 2 | 2 | |
| 50 µm | 6,5 | 2 | 30 | 8 | 2 | 2 | ||
| Tray | 200 µm | 7,0 | 2 | 50 | 8 | 2 | 2 | |
| 100 µm | 3,0 | 2 | 40 | 8 | 2 | 2 |
* Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.
About Creality Halot-Mage S – 14K resin 3D-printer
Image by Creality: The new Creality Halot-Mage S – 14K monochrome resin 3D-printer.
Creality Halot-Mage S – 14K 3D-printer specifications
- – Print Technology: Resin-based, LCD 14K.
- – Build Area: 218mm x 123mm x 230mm.
- – Minimum Layer Resolution: 0.02mm (20 microns).
- – Dimensions: 325mm x 295mm x 640mm.
- – Weight: 10.5kg.
- – Bed: Non-heated, laser-carved platform.
Need assistance with resin 3D-printing?
Contact us if you have any questions or when you need help with settings for Liqcreate resins on the Creality Halot-Mage S 14K or other resin based 3D-printers.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
