The Creality LD-006 is a 4K Monochrome LCD/MSLA 3D-printer is an open printer with a 405 nm light source. The Creality LD-006 is completely open for 3rd party resins. Due to its monochrome screen, even our DLP and SLA resins can be printed with relatively reasonable printing speed. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions.
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Composite-X | 50 µm | 3,8 | 1 base layer of 20 seconds, 5 transition layers and 2,0 seconds wait time |
| Premium Black | 100 µm | n/a | |
| 50 µm | n/a | ||
| Deep Blue | 100 µm | n/a | |
| 50 µm | n/a | ||
| Stone Coal Black | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium White | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Model | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Flex | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Tough | 100 µm | n/a | |
| 50 µm | n/a | ||
| Clear Impact | 100 µm | n/a | |
| 50 µm | n/a | ||
| Strong-X | 100 µm | n/a | |
| 50 µm | n/a | ||
| Tough-X | 100 µm | n/a | |
| 50 µm | n/a | ||
| Flexible-X | 100 µm | n/a | |
| 50 µm | n/a | ||
| Hazard Glow | 100 µm | n/a | |
About the Creality LD-006 resin 3D-printer.
Image by Creality: The Creality LD-006 resin 3D-printer
Technical Specifications of the Creality LD-006 Resin 3D Printer.
- – Technology: 8.9″ 4K Monochrome LCD
- – Print Size: 192x120x250mm
- – Resolution: 4K resin 3D-printer (3840 * 2400 pixels)
- – Max print speed: 60mm/hour (depending on resin)
- – Stable z-axis with a dual linear guide rails
Creality LD-006 resin 3D-printer review
Fabbaloo.com had a chance to review the Creality LD-006 resin 3D-printer. According to Fabbaloo “Setting up an assembled machine is usually quite straightforward, and it should be with the LD-006. However, I did encounter one problem that was easily rectified. To set up the machine you simply place the base unit on a table, insert the resin vat, place the UV cover and plug in the power cord. At that point you can power up the machine and begin calibration. Once the Creality LD-006 was set up, I took some time to explore its features. One very visible aspect is the machine’s size. This is a large resin 3D printer, and especially so when you look down the Z axis as above. 3D printing on the Creality LD-006 is quite straightforward, but there are some complications that are present with any resin 3D printer.” Read the full article about the Creality LC-006 review here.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
