The Phrozen Shuffle and Phrozen Shuffle XL resin 3D-printers are based on RGB LCD technology. Liqcreate Premium resin range will print fastest on both printers. Not all settings have been optimized and some starting settings are available now. Contact us if you need support or have any questions.
Phrozen Shuffle & Shuffle XL resin 3D-printing parameters
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Deep Blue | 100 µm | 33 seconds | 170 seconds 5 base layers |
| 50 µm | 28 seconds | 170 seconds 5 base layers | |
| Stone Coal Black | 100 µm | ||
| 50 µm | 40 seconds | 70 seconds base layers | |
| Premium White | 100 µm | 13 seconds | 120 seconds 5 base layers |
| 50 µm | 11 seconds | 120 seconds 5 base layers | |
| Premium Black | 100 µm | 16 seconds | 110 seconds 5 base layers |
| 50 µm | 12 seconds | 110 seconds 5 base layers | |
| Premium Model | 100 µm | 16 seconds | 110 seconds 5 base layers |
| 50 µm | 12 seconds | 110 seconds 5 base layers | |
| Clear Impact | 100 µm | ||
| 50 µm | 40 seconds | 70 seconds base layers | |
| Strong-X | 100 µm | ||
| 50 µm | 35 seconds | 60 seconds base layers | |
| Tough-X | 100 µm | ||
| 50 µm | |||
| Hazard Glow | 100 µm | ||
| 50 µm | 40 seconds | 70 seconds base layers | |
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
Printer Settings →
About the Phrozen3D Shuffle and Phrozen XL resin 3D-printers
Image by All3DP and Phrozen: The Phrozen Shuffle and Phrozen Shuffle XL resin 3D-printer
Phrozen Shuffle XL resin 3D-printers specifications
The Phrozen Shuffle and Phrozen Shuffle XL resin 3D-printers are based on RGB LCD technology. Liqcreate Premium resin range will print fastest on both printers. Specifications of the Phrozen Shuffle XL resin 3D-printer:
- – Buildsize: 190 * 120 * 200 mm
- – LCD: 8.9″ 2K
- – XY Pixels: 2560*1600 pixels
- – XY Resolution: 75 µm
- – LED Array: ParaLed V2.0
- – LED Power: 160W
- – Print Speed: Up to 20mm/hour
- – Z Resolution: 10 – 100 µm
- – Z-axis: Dual Linear Rail with Ball Screw
- – Printer weight: 22kg
Contact us if you have any questions or when you need help with settings for the Phrozen or other resin based 3D-printers.
