Anycubic Photon Mono 4 – compatible resin & parameters

The Anycubic Photon Mono 4 is an update to the popular Photon mono series. The Photon Mono 4 comes in two versions, the basic one and the Ultra. Find Anycubic Photon Mono 4 Ultra resin 3D-printing parameters in the link. This entry-level printer comes with 10K LCD resolution. Its build volume is 153.4 x 87 x 165 mm and LCD resolution of 9024 x 5120 pixels. This results in an XY pixel size of 17 x 17 µm. Reach out to us at info@liqcreate.com for assistance. Download the Anycubic Photon Mono 4 Chitubox settings for Liqcreate resin in the link and start printing with Liqcreate resin within minutes.

Anycubic Photon Mono 4 resin settings.

Resin	Layer thickness	Exposure time (seconds)	Base layer count	Base layer exposure	Lift Height (mm)	Lift speed / retract speed (mm/min)
Bio-Med Clear	100 µm	9,5	2	60	6	90 / 150
	50 µm	7,0	2	50	6	90 / 150
Bio-Med Flex	100 µm	7,0	2	40	10	60 / 90
	50 µm	6,0	2	40	10	60 / 90
Deep Blue	100 µm	8,5	2	60	6	90 / 150
	50 µm	7,5	2	50	6	90 / 150


Premium White	100 µm	5,0	2	60	6	90 / 150
	50 µm	4,0	2	40	6	90 / 150


Premium Black	100 µm	6,0	2	40	6	90 / 120
	50 µm	4,5	2	30	6	90 / 120
Rigid Pro	100 µm	6,0	2	35	6	90 / 120
	50 µm	5,0	2	30	6	90 / 120


Premium Model	100 µm	6,5	2	40	6	90 / 120
	50 µm	5,5	2	40	6	90 / 120


Premium Tough	100 µm	8,0 (50% UV power)	2	30	6	90 / 102
	50 µm	n/a


Wax Castable	100 µm	8,0	2	60	6	90 / 120
	50 µm	4,5	2	50	6	90 / 120
	25 µm	3,5	2	40	6	90 / 120




Premium Flex*	100 µm	6,5	2	30	10	60 / 90
	50 µm	5,5	2	25	10	60 / 90


Clear Impact	100 µm	10,0	2	70	6	60 / 90
	50 µm	8,0	2	70	6	60 / 90


Stone Coal Black	100 µm	9,0	2	60	6	90 / 120
	50 µm	8,0	2	50	6	90 / 120


ESD	100 µm	12,0	2	70	6	90 / 120
	50 µm	10,0	2	60	6	90 / 120


Flame Retardant	100 µm	7,0	2	50	6	90 / 120
HDT	50 µm	5,1	2	40	6	90 / 120


Flexible-X*	100 µm	12	2	60	10	60 / 90
	50 µm	10	2	50	10	60 / 90


Elastomer-X*	100 µm	14,0	2	60	10	60 / 90
	50 µm	12,0	2	60	10	60 / 90



Hazard Glow	100 µm	9,0	2	60	6	90 / 120

Composite-X	100 µm	8,0	2	70	6	90 / 120
	50 µm	6,0	2	70	6	90 / 120


Dental Model	100 µm	7,5	2	60	6	90 / 120
Pro Beige	50 µm	5,0	2	40	6	90 / 120


Dental Model	100 µm	8,0	2	60	6	90 / 120
Pro Grey	50 µm	5,5	2	50	6	90 / 120


Gingiva Mask	100 µm	10,0	2	40	10	60 / 90
	50 µm	8,0	2	40	10	60 / 90


Separation Model	100 µm	7,0	1	30	6	90 / 150
	50 µm	6,0	1	20	6	90 / 150


Tray	200 µm	8,0	2	50	6	90 / 150
	100 µm	6,0	2	40	6	90 / 150

* Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.

About the Anycubic Photon Mono 4 resin 3D-printer.

Anycubic photon mono 4 series ultra resin 3d-printer liqcreate jewelry wax dental model precise engineering tough strong rubber

Photo by Anycubic: The new 10K resin 3D-printers from Anycubic, the Photon Mono 4 and Photon Mono 4 Ultra.

Anycubic Photon Mono 4 resin 3D-printer specifications.

	Photon Mono 4 Ultra	Photon Mono 4
Device size	231 x 236 x 430 mm	230 x 235 x 391 mm
Device weight	5 kg	4 kg
Build volume	153.4 x 87 x 165 mm
Printing speed (0.1 mm layer height)	Standard resin: max. ≤ 80 mm/h High Speed Resin: max. ≤ 120 mm/h	Standard resin: max. ≤ 50 mm/h High-Speed Resin: max. ≤ 70 mm/h
Layer height	0.02-0.15 mm	0.03-0.15 mm
LCD display	7-inch monochrome LCD
Display resolution	10K
XY resolution	17 x 17 µm
Light source	COB light source+Fresnel lens+light uniformity speed algorithm	Optimised parallel matrix light source, 80–90% light uniformity
Light uniformity	≥ 90%	80–90%
Light intensity	≥ 3500 μW/cm²	~3000 μW/cm²
Release Film	ACF	FEP
Air Purifier	Optional (USB)	Optional (rechargeable)
Device display	4.3 inch TFT touch	2.8 inch TFT touch
Interface	USB, WiFi, LAN	USB
Levelling	Manual 4-point leveling
Slicer	Photon Workshop

If you have any questions related to Liqcreate 3D-printing resins on the Anycubic Photon Mono 4 or other resin based 3D-printer. Send us an e-mail at info@liqcreate.com and our engineers will support to dial-in the requested Liqcreate resin.

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Liqcreate