The EPAX X1N LCD/MSLA 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. Settings for the EPAX X10 with RGD color LCD screen are tested by EPAX3D. Full list of settings can be find here. Some resins have been optimized. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions.
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Strong-X | 100 µm | 36 | 3 base layers of 125 seconds |
| 50 µm | n/a | ||
| Tough-X | 100 µm | n/a | |
| 50 µm | 28.5 | 2 base layers of 95 seconds | |
| Flexible-X | 100 µm | n/a | |
| 50 µm | 26 | First layers 2 x 120 seconds, 2s off-time, use ‘heavy’ supports | |
| Bio-Med Clear | 100 µm | 16,0 | 4 base layers of 80 seconds |
| 50 µm | n/a | ||
| Stone Coal Black | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium White | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Black | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Model | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Flex | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Tough | 100 µm | n/a | |
| 50 µm | n/a | ||
| Clear Impact | 100 µm | n/a | |
| 50 µm | n/a | ||
| Composite-X | 100 µm | n/a | |
| 50 µm | n/a | ||
| Hazard Glow | 100 µm | n/a |
About the EPAX X1N resin 3D-printer
Image by All3DP and Epax3D: The EPAX X1N resin 3D-printer
EPAX3D X1N resin 3D-printer specifications.
- – Parallel Matrix UV light source — Latest revision; best for dental or jewelry applications due to slightly better print details
- – Large 3.5-inch Color TFT Touch Screen. Robust metal build quality. Each printer is calibrated before shipping. Ready to print!
- – Improved Z axis gantry/stability with double steel rod reinforced carriage and steel bearings; Special anti-backlash nuts used for Z axis to produce smoother print; 40W High Energy 50 LED light source. Improved non-FEP film to have much less release force and make it possible to print special resins. Better than FEP film.
- – Support Anti-Aliasing!. Wide selection of resins. Support 405nm wave length 3D printing resins.
Contact us if you have any questions or when you need help with settings for the Epax 3D series or other resin based 3D-printers.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
