The Longer Orange 30 LCD/MSLA 3D-printer is an open printer with a 405 nm light source, compatible with 3rd party resins. Other Longer Orange resin 3D-printer settings are also available. The following settings are optimized for Liqcreate resins. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions.
Resin 3D-printing parameters for the Longer Orange 30
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Premium Black | 100 µm | n/a | |
| 50 µm | 15 | 2 base layers of 90 seconds | |
| Deep Blue | 100 µm | n/a | |
| 50 µm | n/a | ||
| Stone Coal Black | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium White | 100 µm | n/a | |
| 50 µm | 8,0 | 2 base layers of 70 seconds | |
| Premium Model | 100 µm | n/a | |
| 50 µm | 9,5 | 2 base layers of 80 seconds | |
| Premium Flex | 100 µm | n/a | |
| 50 µm | n/a | ||
| Premium Tough | 100 µm | n/a | |
| 50 µm | 11,0 | 5 base layers of 60 seconds | |
| Wax Castable | 100 µm | n/a | |
| 50 µm | 12,0 | 5 base layers of 60 seconds | |
| Strong-X | 100 µm | n/a | |
| 50 µm | n/a | ||
| Tough-X | 100 µm | n/a | |
| 50 µm | n/a | ||
| Flexible-X | 100 µm | n/a | |
| 50 µm | n/a | ||
| Hazard Glow | 100 µm | n/a | |
| 50 µm | n/a | ||
About the Longer Orange 30 resin 3D-printer
Image by Longer 3D: the Longer orange 30 resin 3D-printer.
Longer Orange 30 resin 3D-printer specifications
The Longer3d Orange 30 resin SLA 3D printer is an affordable option when it comes down to 3D printing with photo resins. It offers some significant changes from its predecessor, the Longer Orange 10. The size is the first noticeable change along with enhancing features and functionality of the Orange 30 is sure to lure new users and experienced users alike to the printer. Printing with photo-curing resin is messy, but the amount of detail achieved in these builds is impressive and worth considering if you need a break from printing with filaments. With new monochrome resin 3D-printing technology, the Longer Orange 30 RGB-LCD screen is out-dated. when purchasing a new LCD resin based 3D-printer, it is advised to choose one with monochrome LCD screen.
Contact us if you have any questions related to Liqcreate 3D-printing resins or when you need help with settings for the Longer Orange 30 or other resin based 3D-printers.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
