The Original Prusa SL1 uses MSLA, which means that there is an LED array as it’s light source (405 nm) in combination with an LCD photomask to shape the light image. The SL1 is open source and therefore has full support for 3rd party resin. The SL1 is able to reach a minimum layer height of 0.01 mm, but the recommended layer height by Prusa is 0.025-0.100 mm. Due to the low power of the LED and RGB-LCD technology, the Premium resin range works best on this printer. Most other resins could also work on this printer, however, not all pre-settings are available. Contact us if you need support or have any questions.
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Deep Blue | 100 µm | 25 | First layers 10x 100 seconds |
| 50 µm | 23 | First layers 10x 100 seconds | |
| 35 µm | 21 | First layers 10x 100 seconds | |
| Stone Coal Black | 100 µm | Similar settings as Deep Blue Expected | Settings can be found with the help of the Prusa calibration program |
| Premium White | 100 µm | 14 | First layers 10x 120 seconds |
| 50 µm | 13 | First layers 10x 100 seconds | |
| 35 µm | 11 | First layers 10x 100 seconds | |
| Premium Black | 100 µm | 14 | First layers 10x 120 seconds |
| 50 µm | 13 | First layers 10x 100 seconds | |
| 35 µm | 12 | First layers 10x 100 seconds | |
| Premium Model | 100 µm | 14 | First layers 10x 120 seconds |
| 50 µm | 13 | First layers 10x 100 seconds | |
| 35 µm | 12 | First layers 10x 100 seconds | |
| Premium Flex | 100 µm | 18 | First layers 6x 60 seconds |
| 50 µm | 15 | First layers 6x 60 seconds | |
| 35 µm | |||
| Premium Tough | 100 µm | 18 | First layers 6x 60 second |
| 50 µm | 15 | First layers 6x 60 second | |
| 35 µm | |||
| Wax Castable | 100 µm | ||
| 50 µm | 8.5 | First layers 3x 40 second | |
| 35 µm | |||
| Clear Impact | 50 µm | 25 | 2 base layers of 90 seconds |
| Strong-X | 100 µm | Similar settings as Deep Blue Expected | Settings can be found with the help of the Prusa calibration program |
| Tough-X | 100 µm | Similar settings as Deep Blue Expected | Settings can be found with the help of the Prusa calibration program |
| Hazard Glow | 100 µm | Similar settings as Deep Blue Expected (Use heavy supports) | Settings can be found with the help of the Prusa calibration program |
| Composite-X | 50 µm | 14,0 | 10 base layers of 45 seconds |
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
Printer Settings →
About the Prusa SL1 resin 3D-printer.
Image by Prusa: The Prusa SL1 resin 3D-printer
Prusa SL1 resin 3D-printer specifications.
The original Prusa SL1 is an open-source SLA 3D printer based on the resin MSLA 3D-printing process. Unlike the original Prusa i3 machines, this printer uses a high-resolution LCD panel and a UV LED to cure thin layers of resin (resin) to achieve a high level of detail.
The whole unit is controlled by a color LCD touchscreen and the G-codes can be uploaded via a USB flash drive. However, there is also LAN and Wi-Fi connectivity, where in addition to uploading G-codes, there is also the option of controlling the printer via a web browser. The Prusa SL1 is equipped with a 2K RGB LCD screen, giving it a build area of 5.9 by 4.7 by 2.6 inches.
Contact us if you have any questions or when you need help with settings for the Prusa SL1 or other resin based 3D-printers.
