Wanhao Duplicator D8 compatible resin & parameters

Wanhao is a chinese manufacturer of desktop FDM and LCD/MSLA based 3D-printers. Their Wanhao Duplicator D7 was one of the first available desktop LCD printers for home users. Now upgraded to the Wanhao Duplicator D8. With a build size of 192*120*180mm and pixel size of 75 micron, it was one of the first upgrades in LCD-based resin 3D-printing. Settings are optimized for some Liqcreate resins. The Liqcreate Premium range is especially developed for printing on these type of MSLA / LCD 3D-printers, leading to significantly shorter exposure times. Other resins can also be processed with higher exposure times. Contact us if you need support or have any questions.

Button

Wanhao Duplicator D8 resin 3D-printing settings.

Resin	Layer thickness	Curing time (seconds)	Remark
Deep Blue	100 µm	n/a
	50 µm	n/a



Stone Coal Black	100 µm	n/a
	50 µm	n/a



Premium White	100 µm	n/a
	50 µm	n/a



Premium Black	100 µm	n/a
	50 µm	11	2 burn-in layers of 80 seconds



Premium Model	100 µm	n/a
	50 µm	n/a



Premium Flex	100 µm	n/a
	50 µm	n/a



Premium Tough	100 µm	n/a
	50 µm	n/a



Clear Impact	100 µm	n/a
	50 µm	n/a



Strong-X	100 µm	n/a
	50 µm	n/a



Tough-X	100 µm	n/a
	50 µm	n/a



Flexible-X	100 µm	n/a
	50 µm	n/a



Hazard Glow	100 µm	n/a
	50 µm	n/a

Button

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

About the Wanhao Duplicator D8 resin 3D-printer.

Wanhao Duplicator D8 resin 3D-printer Liqcreate jewelry dental engineering strong tough ABS elastic flexible photopolymer material

Image by Wanhao: Showcasing the Wanhao Duplicator D8 resin 3D-printer.

Wanhao Duplicator D8 resin 3D-printer specifications.

– Technology: Direct UV Printing/mSLA/LCD (resin)
– Build Volume: 190x120x180
– Maximum printing Speed: 30 mm / h (resin dependant)
– Layer Thickness: 10-200 microns
– The Wanhao Duplicator D8 has a resolution of 75 microns
– Power requirement: 100 – 240 V / 1.5 A / 60 Hz / 60 Watt
– Software: Wanhao Slicer Workshop Mango3D
– Compatible with 405nm photopolymer resin

Contact us if you have any questions or when you need help with settings for Liqcreate resn on the Wanhao duplicator D8 or other resin based 3D-printers.

Liqcreate