Anycubic Photon Mono M7 Pro – 14k resin 3D-printing parameters

The evolution of high‑resolution MSLA printing has accelerated rapidly in recent years, and the Anycubic Photon Mono M7 Pro represents one of the most ambitious steps in this segment to date. Rather than focusing solely on resolution, Anycubic designed the M7 Pro as a balanced platform where optical precision, mechanical stability, and high‑speed curing work together to support demanding engineering, jewelry and dental photopolymers. This makes it a particularly relevant machine for users working with advanced materials such as the Liqcreate resin portfolio.

At the center of the system is a 14K monochrome LCD with a native resolution of 13312 × 5120 pixels. Combined with the panel’s rectangular geometry, this results in an XY pixel size of 16.8 × 24.8 micrometers, enabling the M7 Pro to reproduce micro‑features, sharp edges, and fine surface textures with consistency across the entire 223 × 126 × 230 mm build area. The optical engine uses a high‑transmission LCD and a uniform parallel‑light matrix, ensuring that irradiance remains stable even during long prints or when working with resins that require higher energy density.

Where the M7 Pro distinguishes itself from the standard M7 is in its motion system and process control. The reinforced Z‑axis, upgraded carriage assembly, and optimized peel‑force management allow the printer to maintain accuracy at elevated print speeds. This is particularly important more challenging resins, often with higher viscosity or require controlled lift profiles to avoid delamination. The M7 Pro’s firmware is tuned to handle these conditions, enabling faster cycle times without compromising dimensional stability.

For users working with Liqcreate materials, the Anycubic Photon Mono M7 Pro resin settings published in this article provide a foundation for reliable printing. Exposure times, lift speeds, bottom layer strategies, and support recommendations have been tested on the M7 Pro platform to ensure predictable curing behavior. The M7 Pro entered the Liqcreate laboratory in August 2024, and all tested parameters are included here to help users achieve optimal results from the first print. When you have any questions or in need for parameters with Liqcreate resins, please reach out to us at info@liqcreate.com. Download the Chitubox parameter file for Anycubic Photon Mono M7 Pro with Liqcreate resin in the link. With this file you can import all Liqcreate resins in the Chitubox slicer within seconds and start printing right away!

Anycubic Photon Mono M7 Pro Highlights

– 223 x 126 x 230mm Printing Volume
– 130mm/h for Even Standard Resins. 170mm/h with High-speed Resin, 0.1mm Layer (*manufacturers claim)
– 10.1, 14K LCD screen
– 13320 x 5120 pixels with a pixel size of 16.8 x 24.8 micrometer
– Controledl Heating
– Auto Resin Refill and Withdrawal

Anycubic Photon Mono M7 Pro resin settings.

Resin	Layer thickness	Exposure time (seconds)	Base layer count	Base layer exposure	Lift Height (mm)	Lift speed / retract speed (mm/min)
Strong-X	100 µm	6,0	2	60	6	90 / 120
	50 µm	4,5	2	50	6	90 / 120
Stone Coal Black	100 µm	6,0	2	60	6	90 / 120
	50 µm	4,5	2	50	6	90 / 120
Premium White	100 µm	3,0	2	50	6	90 / 120
	50 µm	2,0	2	40	6	90 / 120
Premium Black	100 µm	4,0	2	40	6	90 / 120
	50 µm	3,0	2	30	6	90 / 120
Premium Model	100 µm	3,0	2	50	6	90 / 120
	50 µm	2,0	2	40	6	90 / 120
Premium Tough	100 µm	5,0	2	40	6	90 / 120
Wax Castable	100 µm	4,0	2	50	6	90 / 120
	50 µm	3,0	2	40	6	90 / 120
	25 µm	2,5	2	40	6	90 / 120
Premium Flex*	100 µm	4,0	2	40	10	60 / 90
	50 µm	3,0	2	40	10	60 / 90
Clear Impact	100 µm	10,0	2	60	6	90 / 120
	50 µm	6,0	2	50	6	90 / 120
Deep Blue	100 µm	6,0	2	50	6	90 / 120
	50 µm	4,0	2	50	6	90 / 120
ESD	100 µm	7.0	2	60	8	90 / 150
	50 µm	5.0	2	50	8	90 / 150
Tough-X*	100 µm	12,0	2	60	8	90 / 120
	50 µm	10,0	2	50	8	90 / 120
Flexible-X*	100 µm	10,0	2	60	10	60 / 90
	50 µm	8,0	2	60	10	60 / 90
Elastomer-X*	100 µm	20	2	60	10	60 / 90
Hazard Glow	100 µm	8,0	2	60	6	90 / 120
Composite-X	100 µm	7,0	2	60	6	90 / 120
Bio-Med Clear	100 µm	4,5	2	60	6	90 / 120
	50 µm	3,0	2	50	6	90 / 120
Bio-Med Flex	100 µm	8,0	2	50	10	60 / 90
	50 µm	6,0	2	40	10	60 / 90
Dental Model	100 µm	5,0	2	60	6	90 / 150
Pro Beige	50 µm	4,0	2	50	6	90 / 150
Dental Model	100 µm	5,0	2	60	6	60 / 90
Pro Grey	50 µm	3,5	2	50	6	60 / 90
Gingiva Mask	100 µm	12,0	2	60	10	60 / 90
	50 µm	8,0	2	60	10	60 / 90
Separation Model	100 µm	4,0	1	20	6	90 / 120
	50 µm	3,0	1	15	6	90 / 120
Flame Retardant HDT	100 µm	4.0	2	40	6	90 / 120
	50 µm	3,0	2	40	6	90 / 120
Rigid Pro	100 µm	5,0	2	50	6	90 / 120
	50 µm	4,0	2	40	6	90 / 120

** Tough-X, Flexible-X and Premium flex require heavy supports, Elastomer-X requires extra heavy supports.

Button

About the Anycubic Photon Mono M7 Pro resin 3D-printer.

Image by Anycubic: The new Anycubic Photon Mono M7 Pro resin 3D-printer.

Anycubic Photon Mono M7 Pro resin 3D-printer specifications

	Sonic Mighty Revo	Anycubic Photon Mono M7 Pro
Device size	353 x 345 x 517 mm	312 x 315 x 520 mm
Build volume	223 x 126 x 235 mm	223 x 126 x 230 mm
LCD	14K Monochrome	14K Monochrome
XY resolution	16.8 x 24 µm	16.8 x 24.8 µm
Guide rails	dual linear guide rail (ball screws)	unknown
Film	NFEP
Heater	Yes	Yes (25°C stabilizer)
Plug-in Air Purifier	Yes	Yes
Automatic levelling	Yes	Yes

If you have any questions related to Liqcreate 3D-printing resins on the Anycubic Photon Mono M7 Pro or other resin based 3D-printer. Send us an e-mail at info@liqcreate.com and our engineers will support with the requested Liqcreate resin.

Support

Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!

Printer Settings →

Liqcreate