Liqcreate resin settings for the Beam3D Prism are optimized for the printer’s 2K RGB LCD system. Exposure times, layer parameters and curing profiles are validated to ensure consistent performance across engineering, modeling and creative photopolymers. The RGB LCD architecture requires longer exposure times compared to monochrome systems, which is reflected in the recommended parameters. This page provides an extensive overview of Beam3D Prism resin compatibility with Liqcreate materials, including validated exposure settings, layer thickness recommendations, and workflow considerations for reliable part production.
Liqcreate resins are formulated for broad compatibility with desktop MSLA and RGB‑LCD systems, and the Beam3D Prism is no exception. Most Liqcreate engineering, dental and creative materials polymerize efficiently under the Prism’s 405 nm LED array, provided that exposure times are adjusted to compensate for the reduced UV transmission of the RGB panel. The parameters listed below are based on internal testing, customer feedback and cross‑validation with similar RGB‑LCD printers. These settings serve as a stable baseline for achieving dimensional accuracy, surface quality and mechanical performance across the Liqcreate portfolio.
The Beam3D Prism’s open‑material workflow allows direct import of custom resin profiles, making it suitable for Liqcreate resins such as Premium Model, Premium Tough, Strong‑X, Clear Impact, Flexible‑X, and other engineering‑grade formulations. Each resin category benefits from tailored exposure times, bottom layer curing, lift speeds and rest times to ensure proper polymerization and minimize print artifacts. The tables on this page summarize recommended Beam3D Prism resin parameters for each Liqcreate material, enabling efficient setup for both prototyping and production environments.
Because RGB‑LCD printers transmit less UV energy, exposure times for Liqcreate resins on the Beam3D Prism are typically higher than on monochrome printers. This is normal for RGB systems and does not negatively affect part quality when parameters are correctly configured. Maintaining a stable resin temperature of 20–25 °C, ensuring proper vat film tension, and using the recommended layer thickness values further contribute to consistent curing behavior. With the correct Beam3D Prism resin settings, Liqcreate materials deliver sharp detail reproduction, strong mechanical properties and predictable workflow performance.
The following sections provide detailed resin‑specific settings, including normal exposure, bottom exposure, lift speeds, layer heights and additional recommendations for optimal curing. These parameters form a reliable starting point for printing Liqcreate materials on the Beam3D Prism and can be fine‑tuned based on part geometry, ambient conditions and desired mechanical characteristics. Most resins can work on this printer, however, no pre-settings are available. Contact us if you need support or have any questions.
Beam3D Prism resin compatibility and exposure parameters
Find Beam3D Prism resin 3D-printing parameters in the table below.
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Premium White | 100 µm | 13 | First layers 2 x 180 seconds |
| 50 µm | 11 | First layers 2 x 150 seconds | |
| 35 µm | 9 | First layers 2 x 120 seconds | |
| Premium Black | 100 µm | 13 | First layers 2 x 180 seconds |
| 50 µm | 11 | First layers 2 x 150 seconds | |
| 35 µm | 9 | First layers 2 x 120 seconds | |
| Premium Model | 100 µm | 13 | First layers 2 x 180 seconds |
| 50 µm | 11 | First layers 2 x 150 seconds | |
| 35 µm | 9 | First layers 2 x 120 seconds | |
| Strong-X | 100 µm | 25 | First layers 2 x 180 seconds |
| 50 µm | 23 | First layers 2 x 150 seconds | |
| 35 µm | 21 | First layers 2 x 150 seconds |
Pro-tip RGB vs. Mono: Because the Prism uses an RGB LCD screen, exposure times are generally longer than newer monochrome printers. For Liqcreate engineering resins like Strong-X, ensure your environment is at least 20°C/68°F for optimal flow.
About the Beam3D Prism resin 3D-printer
Image by Beam3D: The Beam3D Prism resin 3D-printer
Beam3D Prism resin 3D-printer specifications
The Beam3D Prism resin 3D-printer has a 120 x 70 x 150 mm build volume, parallel LED array, 2K RGB LCD screen, all-metal design, auto-leveling, resin calibration, multiple supported slicer.
All major slicers
The Prism supports all major slicers, and will continue to be updated as the software for SLA printing evolves.
The 57 watt parallel LED array drives uniform light distribution across the entire build plate, edge to edge.
The leveling system actions at the beginning of every print and when homing the machine.
Magnetic removable build plate
Prism is a resin printer with a 2K LCD screen that allows for high resolution prints that look like finished products.
In addition to delivering files, you are able to: start, stop, pause, edit profiles, and adjust printer settings.
FAQ about Beam3D Prism resin settings and Liqcreate resins
Q: Are Liqcreate resins compatible with the Beam3D Prism? A: The Beam3D Prism is an open‑material RGB‑LCD resin 3D printer and supports most 405 nm photopolymers. Liqcreate engineering, modeling and functional resins are compatible with the Beam3D Prism when exposure settings are adjusted for the RGB LCD architecture.
Q: Why do Liqcreate resins require longer exposure times on the Beam3D Prism? A: The Beam3D Prism uses an RGB LCD screen, which transmits less UV light than a monochrome LCD. As a result, Beam3D Prism resin settings require longer exposure times to achieve full polymerization of Liqcreate materials.
Q: Can the same Beam3D Prism resin settings be used for all Liqcreate materials? A: Exposure times differ between Liqcreate resins due to variations in viscosity, reactivity and pigment load. Each resin requires its own Beam3D Prism resin settings, which are listed in the parameter tables on this page.
Q: What layer thickness is recommended for Liqcreate resins on the Beam3D Prism? A: Most Liqcreate resins perform reliably at 50–100 micron layer thickness on the Beam3D Prism. Engineering materials may benefit from slightly longer exposure times at thicker layers.
Q: Does ambient temperature affect Beam3D Prism resin performance? A: Yes. Liqcreate resins perform best at 20–25 °C. Lower temperatures increase viscosity and may require additional exposure time on the Beam3D Prism.
Q: Is a calibration test recommended before printing functional parts? A: A short exposure calibration test is recommended when using a Liqcreate resin for the first time on the Beam3D Prism. This ensures correct curing behavior and dimensional accuracy.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
