3DWare is established in 2014 based in Mumbai and is a developer and manufacturer SLA & DLP 3D-Printers and 3D-printing supplies. The unique design of the 3DWare Zeta resin 3D-printers enable industrial users to implement resin 3D-printing quickly. 3DWare and Liqcreate are collaborating to optimize resins on the 3DWare printers. Settings for Liqcreate Flexible-X , Composite-X and Tough-X are already available for the Zeta 4K top-down resin 3D-printer and many more photopolymer resins to follow. Contact us to learn more about the settings used for Liqcreate Flexible-X and potentially other Liqcreate resins for the 3DWare Zeta 4K resin 3D-printer.
3Dware zeta 4K resin 3D-printing parameters.
| Resin | Remark |
| Tough-X
|
0,10 mm layer thickness
30 seconds base layers 5,5 seconds part exposure time |
| Flexible-X
|
0,10 mm layer thickness
30 seconds base layers 7,0 seconds part exposure time |
| Composite-X
|
0,035 mm layer thickness
30 seconds base layers 3,0 seconds part exposure time |
About 3DWare Zeta 4K resin 3D-printer.
video by 3DWare: The new 3DWare Zeta top-down resin 3D-printer
3DWare Zeta 4K resin 3D-printer specifications.
The 3DWare Zeta 4K resin 3D-printer is a top-down machine with 405nm 4K projector. The details are not yet available at the time of writing. Contact us if you have any questions or when you need help with settings for the 3DWare Zeta 4K or other resin based 3D-printers.
Image: Liqcreate resin portfolio
Top-down resin 3D-printing.
There are 3 basic styles of 3D printing. The first is Bottom Up Printing, where resin is cured through a window in the bottom of the vat by a light source from below. In this style of resin 3d-printing printing, the build platform is raised out of the resin vat and a ‘peel’ step is required between each layer in order to detach the cured material from the bottom of the vat. This technology is used in most DLP and LCD 3D-printers.
The 3DWare Zeta printers are different. They work with Top-Down 3D-Printing of photopolymer resin. In this method resin is cured by a light source above the vat and the build platform is lowered down into the resin vat. After a layer the build platform moves down and a wiper will add a new layer on top. So there are no peel forces present in this method.
Support
Do you need any help with 3D printing our SLA, DLP or LCD resins? We can help you! Just look for the question you have below. If you can’t find it, let us know by contacting us!
